Bootp Client Messages - Fujitsu Primergy BX900 System Message Manual
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
2.13
BOOTP Client Messages
This section contains the BOOTP Client module messages.
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
do_bootp(): osapiNetIfConfig Failed for Service Interface
Service interface configured fail.
Check the Bootp Server or interface environment.
6
do_bootp():usmDbAgentIpIfAddressSet() returned failure.
The system IP address set fail.
The system IP address is failed to assign.
6
do_bootp(): osapiSetBroadAddr failed
Broadcast Address of the interface set fail
The system is connected to the Bootp Server unsucessfuly.
6
do_bootp():Timeout
Soctet select timeout.
The system is connected to the Bootp Server unsucessfuly.
6
do_bootp(): Error in Receiving the packet
Packet receive fail
The system is connected to the Bootp Server unsucessfuly.
6
Option not specified in the Vendor field. Possible Reason:This
Tag value not specified on BOOTP server.
BOOTP option get fail
The BOOTP Server is failed
6
getParamsFromBootpStruct():L7_bootp_option_get() returned
failure for netmask
BOOTP option get fail
The BOOTP Server is failed
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
