3.1.5
Privilege Level
This section contains the privilege level
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Incorrect input! Use 'privilege <mode> [all] reset <LINE>'.
User input incomplete command .
Use 'privilege <mode> [all] reset <LINE>
Error!! Command length should less the 128 characters.
User input lenth of command is larger then 128 characters.
User enter command length should be less then 128 characters
Error!! Could not reset this command.
User input an not configured command.
User should input configured privilege command.
Error!! Could not find this command.
User input an not exist command.
User should input exist command.
Error!! This command had configured already.
User input a already configured command.
User should input none configured privilege command.
Incorrect input! Use 'enable [<privilege level>]'.
User input incompletely command
Use 'enable [<privilege level>]
No password set.
User higher access specified privilege level but the level did not
set enable secrect password.
Set enable secrect password for specified privilege level.
Incorrect input! Use 'disable [<privilege level>]'.
User input incompletely command
Use 'disable [<privilege level>]
New privilege level must be less then current privilege level.
2011 Fujitsu Technology Solutions
©