2.9
COS Messages
This section contains the COS module messages.
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
<routine_name>: Unable to apply saved config -- using factory
defaults instead
Unable to apply saved config
The file is corrupt and reset the factory default instead
6
<routine_name>: Cannot obtain default traffic class mapping for
IP Prec <L7_QOS_COS_MAP_NUM_IPPREC>, intf <intIfNum>
Cannot obtain default traffic class mapping for IP Prec
The setting config may be error.
6
<routine_name>: Cannot obtain default traffic class mapping for
IP DSCP <L7_QOS_COS_MAP_NUM_IPDSCP>, intf
<intIfNum>
Cannot obtain default traffic class mapping for IP DSCP
The setting config may be error.
6
<routine_name>: Global COS mapping table config is no longer
valid
Global COS mapping table config is no longer valid
The COS value is invalid for the system
6
<routine_name>: Failed applying config data to interface
<intIfNum>
Failed applying config data to interface
The interface number is invalid for the system.
6
<routine_name>: Failed applying COS map table config data to
interface <intIfNum>
Failed applying COS map table config data to interface
COS map table config to set to fail
2011 Fujitsu Technology Solutions
©