Fujitsu Primergy BX900 System Message Manual page 73
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
usmDbServicePortIPAddrSet() returned failure
Service interface IP address set fail.
Fail to assign the IP Address
6
DbAgentIpIfAddressSet() returned failure
Network interface IP address set fail.
The assigned IP address is not the MAC address.
6
Conflict w/offered IP Addr, error=errorMsg
Network interface IP address set fail (IP Address conflict).
IP address is doublely assigned in the network segement.
6
msgQueue creation error for service port.
Message queue for service port create fail.
Network port are failed to create
6
TAG ID not found in the buffer
TAG of DHCP packet search fail.
The BOOTP system is abnormal condition.
6
dhcp_bind(): servPort dhcpstate failed
Network interface state fail.
The system is unavailable for the DHCP server and the
environment is need to be checked again.
6
usmDbDhcp_Client_Identifier_Tag():Oversize DHCP packet in
usmDbDhcp_Client_Identifier_Tag
DHCP client identifier tag insert fail.
Check the DHCP server system available or not
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
