Protocol-Based Vlan - Fujitsu Primergy BX900 System Message Manual
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
3.2.4
Protocol-based VLAN
This section contains the Protocol-based VLAN module messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
The group does not exist.
User adds a protocol to an nonexistent group.
Create a Protocol-based VLAN group first.
The group already exists.
User attempt to add a protocol group name that had been
created.
Create a protocol group name with an unused name.
Incorrect input! Use 'switchport protocol group <groupname>'.
User input incomplete command.
Use 'switchport protocol group <groupname>'.
VLAN Protocol Group name must be less than 16 characters
User input a group name over 16 characters.
Use a group name less than 16 characters.
Incorrect input! Use 'switchport protocol group add protocol
<groupname> {ip|arp|ipx}'.
User input incomplete command.
Use 'switchport protocol group add protocol <groupname>
{ip|arp|ipx}'.
Incorrect input! Use 'no switchport protocol group <groupname>'.
User input incomplete command.
Use 'no switchport protocol group <groupname>'.
Incorrect input! Use 'no switchport protocol group add protocol
<groupname> {ip|arp|ipx}'.
User input incomplete command.
Use 'no switchport protocol group add protocol <groupname>
{ip|arp|ipx}'.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
