Fujitsu Primergy BX900 System Message Manual page 111

Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
Unit: <unit-id>: Can't send ekeying status
eKeying status can't be sent from stack member to stack master.
Checking the stacking cable if it is connected probably or not.
6
Unit <unit-id> attached successfully
Unit is attached successfully in the stack.
Unit is ready for operation.
6
Error: usp <unit>/<slot>/<port>: Card Not Attached,
cmd=<cmd>, count=<count>, task: <taskname>
Interface unit/slot/port is not presented so that the command
<cmd> can't be applied to the chipset.
Just a notice. After the interface is attached, the configuration
will be applied to the chipset automatically.
6
Stack Port Link Up: Index: 100 Unit: 1 Tag: Stack 1
The stack port (Stack 1) of unit ID 1 is link up.
The stack port is link up. You could check if the new unit is joined
to the stack.
6
Stack Port Link Up: Index: 101 Unit: 1 Tag: Stack 2
The external stack port (Stack 2) of unit 1 is link up.
The external stacking port is link up on unit 1.
6
Stack Port Link Down: Index: 100 Unit: 1 Tag: Stack 1
The stack port (Stack 1) of unit ID 1 is link down.
User should check if the internal stacking link is disabled from
MMB.
6
Stack Port Link Down: Index: 101 Unit: 1 Tag: Stack 2
The external stack port (Stack 2) of unit 1 is link down.
User should check if the external stacking cable is removed.
Please reconnect the stacking cable if you want to maintain the
original stack.
2011 Fujitsu Technology Solutions
©