Fujitsu Primergy BX900 System Message Manual page 270

Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Invalid ACL Name. Name string may include alphabetic,
numeric, dash, dot or underscore characters only. Name must
start with a letter and the size of the name string must be less
than or equal to 31 characters.
User input invalid format of MAC ACL name.
Name string may include alphabetic, numeric, dash, dot or
underscore characters only. Name must start with a letter and
the size of the name string must be less than or equal to 31
characters.
Incorrect input! The maximum of 100 ACLs is already
configured.
User attempt to create an ACL when table is full.
Maximum 100 ACLs can be created.
MAC Access-list does not exist.
User attempt to delete a non-exist MAC access-list.
Make sure the MAC access-list is exist.
Incorrect input! Use 'mac access-group <name> in
[<sequence>]'.
User input incomplete command.
Use 'mac access-group <name> in [<sequence>]'.
Incorrect input! Use 'no mac access-group <name> in
[<sequence>]'.
User input incomplete command.
Use 'no mac access-group <name> in [<sequence>]'.
MAC Access-list does not exist.
User attempt to assign a non-exist MAC ACL to a interface.
Make sure the MAC ACL is exist.
Error: ACL and Diffserv can not be used on the same interface in
the same direction.
User attempt to enable ACL & Diffserv on the same interface.
User can only enable ACL and Diffserv on a interface at the
same time.
2011 Fujitsu Technology Solutions
©