Fujitsu Primergy BX900 System Message Manual page 343

Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: Failed to set Admin Mode. Interface <interface identifier>
was disabled by e-keying function.
User try to enable a interface, but it is failed. The interface is
disabled by the e-Keying function.
Check the e-Keying status of this interface first. User does not
allow to enable it while the e-Keying status is disabled.
To enable the e-Keying, please refer to the MMB operations.
Error: Failed to set Admin Mode. This function is not allowed on
port-channel members <interface identifier>.
User try to set Admin Mode on a prot-channel member, and it is
failed.
To set the Admin Mode from the port-channel interface.
Error: Failed to set Port Description.
User try to change the Port Description of the interface, but the
interface doesn't exist in the system.
Refresh the WEB page, and select the interface again.
Error: Maximum Frame Size format is invalid.
The value of Port Maximum Frame Size is out of range.
Set Port Maximum Frame Size with numeric value from 1518 to
9216.
Error: Value (<value>) is out of range for Maximum Frame Size.
The valid range is 1518 to 9216.
The value of Port Maximum Frame Size is out of range.
Set Port Maximum Frame Size with numeric value from 1518 to
9216.
Error: Failed to set STP Loop Guard Mode.
User try to change the STP Loop Guard Mode of the interface,
but the interface doesn't exist in the system.
Refresh the WEB page, and select the interface again.
Error: Failed to set STP Root Guard Mode.
User try to change the STP Root Guard Mode of the interface,
but the interface doesn't exist in the system.
Refresh the WEB page, and select the interface again.
2011 Fujitsu Technology Solutions
©