Port-Backup - Fujitsu Primergy BX900 System Message Manual
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
4.2.15
Port-backup
This section contains the Port-backup module messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
The active port should be different from the backup port.
The active port and backup port of Port-backup function can not
be set to use the same interface.
Use different interface rather than the backup port for the active
port.
Error: Failed to set Active Port.
The interface can not set to be active port.
Set active port with the interface which is not used by other
module.
Error: Failed to set Backup Port.
The interface can not set to be backup port.
Set backup port with the interface which is not used by other
module.
Error: port pair should be configured before enabling this group.
The active port and backup port have to be configured before
you enable this group.
Configure the active port and backup port before enabling group
mode.
Error: Failed to set Group ID.
There are already 6 maximum Port-backup Group existed. For
stacking switch, the maximum 32 port-backup group is
supported.
Reduce/Remove other unnecessary Port-backup group.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
