Table of Contents
Advertisement
Quick Links
PRIMERGY BX920 S3
System configurator and order-information guide
January 2014
Contents
Instructions
Configuration diagram
Configurator
0
System software
X
BX920 S3 Dual Socket
#
XI
Processor
#
XII
Memory
#
XIII
Storage
#
XIV
RAID Functionality
#
iRMC S3, Graphics
XV
#
XVI
Mezzanine Cards
#
#
L
Storage Blades
#
LI
SX910 Tape Blade
#
LII
SX910 SAS Controller
#
LIII
SX910 SAS Tape Drive
#
Change report
PRIMERGY Server
XX
20
XXI
21
XXII
22
XXIII
23
XXIV
24
XXV
25
XXVI
26
#
LIV
SX940 Storage Blade Disk
#
LV
SX940 SAS Controller
#
LVI
SX940 Quad Disk Blade
Advertisement
Table of Contents
Related Manuals for Fujitsu PRIMERGY DX920 S3
Summary of Contents for Fujitsu PRIMERGY DX920 S3
- Page 1 PRIMERGY BX920 S3 System configurator and order-information guide January 2014 Contents Instructions Configuration diagram Configurator System software BX920 S3 Dual Socket Processor XXII Memory XIII XXIII Storage XXIV RAID Functionality iRMC S3, Graphics XXVI Mezzanine Cards Storage Blades SX910 Tape Blade SX940 Storage Blade Disk SX910 SAS Controller SX940 SAS Controller...
- Page 2 Please note that there are information symbols which indicate necessary information. For further information see: (internet) http://ts.fujitsu.com/products/standard_servers/index.html (extranet) https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/Pages/Currentconfigurators.aspx Prices and availability see price list and PC-/ System-Architect Subject to change and errors excepted Fujitsu PRIMERGY Server 2 of 14...
- Page 3 The population order for the CPU is: CPU1 first, then CPU2 The population order for the DIMMs: for each CPU, the DIMM row 1 (DIMMS 1A 1B 1C) (DIMMS 1D 1E 1F) first, then row 2 (DIMMs 2A, 2B, 2C) (DIMMs 2D, 2E, 2F) Fujitsu PRIMERGY Server 3 of 14...
- Page 4 This order number must be in the same order as the System Unit itself. Contains ServerStart CD min. 1x per System Unit; max. 18x per System Unit; max. 1x per Server Blade max. 1x per Server Blade Fujitsu PRIMERGY Server 4 of 14...
- Page 5 1333/1600 MHz DDR3 Bus, 8,00 GT/s QPI Bus and passive heat sink occupies socket for one CPU Xeon E5-2430L 6C/12T 2.00GHz 15MB 7.20GT/s 1333MHz 60W S26361-F4567-E200 Xeon E5-2450L 8C/16T 1.80GHz 20MB 8.00GT/s 1600MHz 70W S26361-F4567-E180 Fujitsu PRIMERGY Server 5 of 14...
- Page 6 10000rpm,<4,5ms, 8MB Cache SAS 6Gb/s SAS 6Gb/s SAS 6Gb/s hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray max. 2x per base unit max. 2x per base unit max. 2x per base unit Fujitsu PRIMERGY Server 6 of 14...
- Page 7 SAS CB with the PY SAS RAID HDD Module S26361-F4531-E513 or PY SAS RAID HDD Module w/o cache S26361-F4531-E300 S26361-F4531-E50 RAID HDD Module Connection Kit 2x SAS HDD BP max. 1x per Server Blade Fujitsu PRIMERGY Server 7 of 14...
- Page 8 S: see separate BX900 System Unit configurator, sheet "10 GB Ethernet" T: see separate BX900 System Unit configurator, sheet "Fibre Channel" U: see separate BX900 System Unit configurator, sheet "InfiniBand" V: see separate BX900 System Unit configurator, sheet "CB SAS" https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx Fujitsu PRIMERGY Server 8 of 14...
- Page 9 In channel B is always the mirrored memory of channel A of CPU 1 In channel E is always the mirrored memory of channel D of CPU 2 Minimum configuration is: 2x identical modules This mode is not supported by x8 organized memory modules Fujitsu PRIMERGY Server 9 of 14...
- Page 10 Load Reduced Memory (LRDIMM) with SDDC (chipkill) support - one DDR3 load reduced ECC mem. Module, 1.35V Choose up to 6 order codes per CPU 16GB (1x16GB) 4Rx4 L DDR3-1333 LR ECC S26361-F3698-E616 32GB (1x32GB) 4Rx4 L DDR3-1333 LR ECC S26361-F3698-E617 Fujitsu PRIMERGY Server 10 of 14...
- Page 11 Bank II on CPU 1/2 up to 3 memory modules connected to Channel A - F on the 1st/2nd CPU - See below and next page for a detailed descriptions of the memory configuration supported. Fujitsu PRIMERGY Server 11 of 14...
-
Page 12: Independent Channel Mode
2nd XEON CPU (4/6/8 Core) (4/6/8) Core) Performance Channel Mode requires identical modules on all channels of each Bank per CPU. If this mode is used, a multiple of 3 identical modules has to be ordered. Fujitsu PRIMERGY Server 12 of 14... -
Page 13: Rank Sparing Mode
The available memory for applications will vary depending on configuration. Please refer to the spreadsheet above "Effective Memory capacity with active Rank Sparing Mode". Population rule for Rank sparing mode is to achieve max. available memory. Fujitsu PRIMERGY Server 13 of 14... -
Page 14: Change Report
New order for 2.5” 10K SAS HDD supporting mix with 2.5” BC-SATA HDD S26361-F5227-E1* 2012-07-23 corrected text for 2 end Y-Cable 2012-06-28 S26361-F5225-E*00 New order for SATA SSD´s 2012-06-12 Added 1333 RDIMM 2012-05-29 2012-05-01 First Release Fujitsu PRIMERGY Server 14 of 14...