Port Security - Fujitsu Primergy BX900 System Message Manual
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
4.4.2
Port Security
This section contains Port Security module messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: Port Security Dynamic Limit format is invalid.
User uses non-numeric characters for Dynamic Limit.
Use numeric character for Dynamic Limit.
Error: Value (<value>) is out of range for Dynamic Limit. The
valid range is 0 to 600.
The value of dynamic limit is out of range.
The range of Dynamic Limit is 0 to 600.
Error: Port Security Static Limit format is invalid.
User use non-numeric characters for Static Limit.
Use numeric character for Static Limit.
Error: Value (<value>) is out of range for Port Security Static
Limit. The valid range is 0 to 20.
The value of Maximum Number of Statically Locked MAC
Addresses Allowed is out of range.
The range of Maximum Number of Statically Locked MAC
Addresses Allowed is 0 to 20.
Error: MAC Address requires a MAC address in form
01:23:45:67:89:AB.
The character of Static MAC Address is not hexadecimal form.
To set Static MAC address with hexadecimal character 1 to F.
(xx:xx:xx:xx:xx:xx)
Error: Failed to add Port Security Static MAC Address
The Static MAC Address is already configured.
Create other Static MAC Address which is not used.
Error: VLAN ID format is invalid.
User uses non-numeric characters for VLAN ID.
Use numeric character for VLAN ID.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
