2.1
System Messages
This section contains system module messages.
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
2
0xaaaaaaaa
Start of new execution
The system starts to init.
2
0xbbbbbbbb
The auto-download process is finished and the switch is going to
be rebooted.
After the switch is booted, checking if it is joined to the stack and
the version of the switch is upgraded.
2
0xcccccccc
The event log is cleared.
The event log is cleared. There should be one entry in the event
log.
2
0xdddddddd
Single-bit ECC error is detected.
If it is possible, user is recommended to replace the DDR-RAM
module from the blade switch.
2
0x4
This event is logged while a user try to reload a stack, stack
master and stack members will log this event.
Please check if the stack had ever issued a reload command.
2
0x0
This event is logged while a user try to reload a stack member,
stack member will log this event.
Please check if the stack master had ever issued a reload
command to this stack member.
2011 Fujitsu Technology Solutions
©