Fujitsu Primergy BX900 System Message Manual page 59
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
dot1xApmHeldAction reAuthenticating: failed sending terminate
cause, intf <Interface Number>
Failed sending terminate cause reauthentication failure.
The system is terminate to send.
6
dot1xApmHeldAction: could not set state to unauthorized, intf
<Interface Number>
Could not set state to unauthorized in the APM state held.
The authorized state is failed.
6
dot1xApmForceAuthAction: could not set state to authorized, intf
<Interface Number>
Could not set state to authorized in the APM state forece
authorized.
The state is unauthorized by the interface number.
6
dot1xApmForceUnauthAction: could not set state to
unauthorized, intf <Interface Number>
Could not set state to unauthorized in the APM state force
unauthorized.
The state is unauthorized by the interface number
6
dot1xApmForceUnauthAction: failed sending terminate cause,
intf <Interface Number>
Failed sending terminate cause administrator reset.
The state is unauthorized by the interface number.
6
dot1xBamResponseAction: failed getting auth method, intf
<Interface Number>
If we couldn't get an auth method, log an error and fail the
authentication.
The interface number is need to be authorized.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
