Fujitsu Primergy BX900 System Message Manual page 221
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Incorrect input! Use 'spanning-tree configuration revision
<0-65535>'.
User input incomplete command .
Use 'spanning-tree configuration revision <0-65535>'.
Error: Could not set the bridge maxage.
The bridge maxage value must be less than or equal to 2 *
(bridge forwarddelay - 1)
and greater than or equal to 2 * (bridge hellotime + 1).
User input invalid value for setting bridge maxage.
The bridge hellotime value must be less than or equal to (bridge
maxage / 2) - 1.
Error: Could not set the bridge hellotime.
The bridge hellotime value must be less than or equal to (bridge
maxage / 2) - 1.
User input invalid value for setting bridge hellotime. .
The bridge hellotime value must be less than or equal to (bridge
maxage / 2) - 1.
Error: Could not force BPDU migration check on this port.
Forceversion for the switch must be 802.1s or 802.1w.
User attempt to enable protocol-migration on 802.1d mode.
Change the spanning mode to 802.1s (MSTP) or 802.1w
(RSTP).
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
