4.1.9
CDP
This section contains the Config messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: Failed to set CDP Hold Time.
The value of Hold Time is non-numeric value or out of range 10
to 255.
Use numeric value for CDP Hold Time and make sure the value
is in the range of 10 to 255.
Error: Failed to set CDP Transmit Time.
The value of Transmit Interval is non-numeric value or out of
range 5 to 254.
Use numeric value for CDP Transmit Time and make sure the
value is in the range of 5 to 254.
2011 Fujitsu Technology Solutions
©