2.24
Port-Monitor Messages
This section contains the Port-Monitor module messages.
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
nimIntfQuery failed for intIfNum <intIfNum>
Determine if the interface is attached
The interface need to check the attached available or not.
6
Error on call to sysapiCfgFileWrite routine on config file
mirrorCfgData.cfg
check for file saving
The config file is corrupt instead of fatory-default.
6
mirrorIntfChangeCallback: Received an interface event callback
while not in EXECUTE state
routine outside the state
The port-monitor module is failed to init.
6
Mirroring: Failed to notify components of probe status change
Notify all interested components of an Interface Change event
The port-monitor module is failed to init.
2011 Fujitsu Technology Solutions
©