Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
Failed to malloc pSysapiCfgTree[INDEX]
Memory allocation is failed.
The system is failed to init.
6
Could not separate SYSAPI_CONFIG_FILENAME
Configuration file separation is failed.
The configuration file is wrong and need to check again.
6
Configuration file FILENAME size is 0 (zero) bytes.
Getting configuration file size is failed.
The configuration file corrupts or does not exists instead of the
factory default.
6
Failed to read config file FILENAME header
Configuration file read fail.
The config file is corrupted instead of the factory default.
6
Version Check Failed.
Wrong configuration file version.
The configuration file needs to be verified.
6
Configuration file on disk size SIZE1 is less than expected size
SIZE2.
Wrong configuration file size.
The configuration file is corrupted instead of the factory default.
6
sysapiCfgFilesSeparate: CRC check failed. CHECKSUM1 read
and CHECKSUM2 calculated.
Wrong configuration file checksum value.
The configuration file is not matched and need to be checked.
6
File FILENAME1 hdr name = FILENAME2 is invalid.
Wrong configuration file name.
The configuration file name is wrong and need to be checked.
2011 Fujitsu Technology Solutions
©