3.2.9
IGMP Snooping
This section contains the IGMP Snooping module messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Incorrect input! Use 'ip igmp snooping static <macaddr> vlan
<vlan-id> interface <unit/slot/port>
Incomplete command for this function.
Use 'ip igmp snooping static <macaddr> vlan <vlan-id> interface
<unit/slot/port>
IGMP Snooping ADMIN must be enable. Use 'ip igmp snooping'
command to enable.
User attempt to set static multicast group before enable ip igmp
snooping.
Use 'ip igmp snooping' command to enable IGMP Snooping first.
This function is not allowed on port-channel members.
User attempt to set static multicast group on a port-channel
member. But it is failed.
The static multicast group can not be configured on port-channel
members.
User Input Error: Invalid MAC Address
User input invalid format of MAC Address.
Correct the format of MAC Address.
Incorrect input! Use 'ip igmp snooping mrouter interface'.
Incomplete command for this function.
Use complete command 'ip igmp snooping mrouter interface'.
Incorrect input! Use 'no ip igmp snooping mrouter interface'.
Incomplete command for this function.
Use complete command 'no ip igmp snooping mrouter interface'.
Incorrect input! Use 'ip igmp snooping groupmembershipinterval
<2-3600>'.
Incomplete command for this function.
Use complete command 'ip igmp snooping
groupmembershipinterval <2-3600>'.
2011 Fujitsu Technology Solutions
©