Parts Of The Reader; Selecting The Interface Type; Interface Selection - Datalogic QW2520 Quick Reference Manual

Parts of the Reader

PARTS OF THE READER
1. Cable Release Hole
3. Scan Window

SELECTING THE INTERFACE TYPE

Upon completing the physical connection between the
reader and its host, proceed directly to Interface Selection
below for information and programming for the interface
type supported by the reader and scan the appropriate
bar code to select your system's correct interface type,
according to your application.
For interfaces other than those listed in this manual, see
the QuickScan™ 2500 Product Reference Guide (PRG),
available online at www.datalogic.com.

Interface Selection

The reader will support all the following host interfaces:
RS-232 STD
•
RS-232 WN
•
IBM46XX port 9b (a specific cable's required)
•
USB HID POS
•
USB Toshiba TEC
•
USB (Keyboard, COM, OEM)
•
1. Available only for
10
QUICKSCAN™ 2500
1
1
QuickScan™ QD2500
2. LED
4. Trigger
1