Scale Diagnostics Mode Enable - Datalogic MAGELLAN 8300 Product Reference Manual

Scale Diagnostics Mode Enable

6-56
Enables/disables the ability for the operator to initiate scale diagnostics.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the two bar codes below. You'll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
SCALE DIAGNOSTICS MODE = DISABLE
SCALE DIAGNOSTICS MODE = ENABLE
®
Magellan 8300/8400