Table of Contents
Advertisement
SCANNING FEATURES
Stand Mode/Object Detection Indication (Stand Mode Flash)
This operation is useful for indicating when the reader is in Stand Mode. If enabled, the
blue indicator will blink when Stand Mode scanning is active.
$CSMFL00
Stand Mode/Object Detection Indication = Enable
Stand Mode/Object Detection Sensitivity
Sets the sensitivity level for stand mode/object detection wakeup. Choices are low,
medium and high.
$CSMSE00
Stand/Base Detection Sensitivity = Medium
$CSMSE02
ENTER/EXIT PROGRAMMING MODE
Stand Mode/Object Detection Indication = Disable
$CSMFL01
Stand/Base Detection Sensitivity = Low
$CSMSE01
Stand/Base Detection Sensitivity = High
PRODUCT REFERENCE GUIDE
99
Advertisement
Table of Contents
