Table of Contents
Advertisement
Clerk Report
The Clerk Report selection allows you to reprogram the descriptors that appear with the Clerk Report
totals and counters. For example: the first total on the clerk report "NET SALES" might be re-labeled
to say "ALL SALES". You can reprogram any of the Financial Report totals listed here with any 24-
character descriptor.
Sam4s ER-260EJ/256EJ OP Manual v1.20
1. From the MESSAGES screen, select CLERK RPT or press 5. Press CASH to
display the CLERK RPT screen.
CLERK RPT
1.NET SALE
2. There are 63 descriptors, corresponding to the order information appears on the
Financial Report (go to "Clerk" on page 177 to see a sample report.)
3. Use the CHARGE1 and the CHARGE2 keys to select the report line you wish to
program and press the CASH key.
4. Type the new descriptor (up to 24 characters) using the overlay (or enter codes if
code method selected in system options). Press CASH to confirm the new line.
5. Continue to program additional lines or press CLEAR to return to the PROGRAM
MODE screen.
Program Mode Programming • 167
Advertisement
Table of Contents
