Clerk Report - Sam4s SPS-300 Programming & Operation Manual

Clerk Report

The Clerk Report selection from the LOGO DESCRIPTOR PROGRAM screen allows you to
reprogram the descriptors that appear with the Clerk Report totals and counters. For example, the first
total on the clerk report "NET SALES" might be re-labelled to say "GROSS SALES". You can
reprogram any of the Financial Report totals listed here with any 12 character descriptor.
1. From the LOGO DESCRIPTOR PROGRAM screen, press 4 to display the CLERK REP
MESG. Screen:
2. The first 3 report descriptors (TTLs 1-3) display with the cursor arrow pointing at the first
message. Using the alpha numeric keyboard overlay, type the descriptor. Each descriptor can
be up to 12 characters. If you make a mistake, press the BACKSPACE key to erase the
previous character. After you have completed typing the first descriptor, press ENTER
(CASH) to accept the new message and advance to the TTL, or press ESC (CLEAR) to
return to the LOGO DESCRIPTOR PROGRAM screen without making any changes.
3. Press ENTER (CASH) repeatedly, or press PAGE UP and/or PAGE DOWN to locate the
next descriptor you wish to program. After the last item on each screen, the screen shifts to
display the next 3 descriptors. (There are 68 Clerk Report descriptors that you may program.)
Using the same procedure, continue programming each line as necessary. Press ESC
(CLEAR) at any time to exit and return to the LOGO DESCRIPTOR PROGRAM screen.
SAM4S SPS-300 Series Electronic Cash Register AU
CLERK REP MESSAGE
LINE 1 :
NET SALE
LINE 2 :
NON TAX
LINE 3 :
GST SALES
Program Mode Programming • 249