Removing The Power Supply Pcb; Removing The Fixing Assembly; Removing The Pickup Assembly; Manual Pickup Roller - Canon LBP2900 series Service Manual

3.4.1.7 Removing the Power Supply PCB

1) Disconnect the flat cable [1].
2) Disconnect the 4 connectors [2], and free the harness [4] from the
harness guide [3].
F-3-85
3) Disconnect the high-voltage connector [1].
4) Remove the 6 screws [2], and detach the power supply PCB [3].
[3]
[1]
[2]
[2]
F-3-86

3.4.1.8 Removing the Fixing Assembly

1) Remove the 3 screws [1], and detach the fixing assembly [2].
[1]
[2]
F-3-87

3.4.1.9 Removing the Pickup Assembly

1) Remove the 2 screws [1], and detach the rear plate [2].
0009-2767
0008-3591
[1]
0008-1059
[1]
[2]
F-3-88
2) Detach the 6 adhesive segments [1] of the plastic film sheet.
[1]
F-3-89
3) Remove the 6 screws [1], and detach the pickup assembly [2].
[2]
[1]
[1]
F-3-90

3.4.2 Manual Pickup Roller

3.4.2.1 Removing the Pickup Roller

1) Open the delivery tray.
2) Open the upper cover.
3) While picking the 2 claws [1], detach the pickup roller [2].
Chapter 3
[1]
[1]
0008-1076
3-19