Table of Contents
Advertisement
1.
From your network administrator obtain an IP address, subnet mask, and gateway address for
controller A and controller B.
2.
Use the provided micro-DB9 serial cable to connect controller A to a serial port on a host computer.
Your package contents include a micro-DB9-to-DB9 serial cable. If necessary, use a DB9-to-DB25 adapter
(not included) for connecting the serial cable to a DB25 serial port on the host computer.
3.
Start and configure a terminal emulator, such as HyperTerminal or VT- 1 00, using the display settings in
Table 3
and the connection settings in
Table 3
Terminal emulator display settings
.
Parameter
Terminal emulation mode
Font
Translations
Columns
4.
In the terminal emulator, connect to controller A.
Table 4
Terminal emulator connection settings
Parameter
Connector
Baud rate
Data bits
Parity
Stop bits
Flow control
5.
Press Enter to display the CLI prompt (#).
Table
4.
Value
VT- 1 00 or ANSI (for color support)
Terminal
None
80
Value
COM1 (typically)
1 15,200
8
None
1
None
HP StorageWorks Carrier-Grade 2324fc Modular Smart Array user guide
25
Advertisement
Table of Contents
