Input Settings; No-Signal Input Monitoring - IDK MSD-6203 User Manual

MSD-62 Series User's Guide
9.7

Input settings

9.7.1 No-signal input monitoring

Menu Top→INPUT SETTING→INPUT VIDEO DETECT
Setting for Each input channel, digital input only
Setting value OFF, 2000ms to 15000ms (100mssteps) [Default] 10000ms
If you change the EDID settings of the MSD or power the MSD off/on, the source device may not output a
video signal. Use this menu to set the monitoring time which is from when a source device stops outputting
signal to when the MSD requests the source device to output video signal.
Video signal from
Notes:
If you are using the monitor power-saving or dual monitor features on your PC, set this feature to "OFF". This
will avoid unpredictable operation.
When using this feature, ensure that the "monitoring time" is set for a value greater than the amount of time
needed for the source to provide an output signal.
Video signal from
source device
OFF
78
Changing EDID
ON
source device
OFF
ON
Hot plug
OFF
[Fig. 9.12] Monitoring absence of input
Changing EDID
Monitoring
ON
Outputting source device's video
[Fig. 9.13] Repeating output signal setting
Requesting source device to
output video signal
Monitoring
Requesting source device to output signal
Monitoring
Monitoring