Table of Contents
Advertisement
Selecting Integrated Media Block (IMB)
preferences
Choose from the available options to set the type of Integrated Media Block (IMB).
1. In the left navigation menu, select Service Setup > Preferences.
2. Select IMB.
3. In the Type list, select Christie from the available IMB models.
4. When the system prompts you to reboot the projector, select Reboot.
5. After the projector has restarted, log in with your user account.
Activating marriage
After selecting the Integrated Media Block (IMB) type, you must install the IMB and complete marriage
to display secure content and to comply with the Digital Cinema Initiatives (DCI) specification. You
cannot complete marriage remotely.
For more information on marriage, refer to CineLife+ 2.0 User Guide (P/N: 020-103845-XX).
You cannot complete marriage remotely because you must select the Marriage button on the input
panel during the marriage process.
1. Verify the marriage ring is installed correctly and an anti-tamper alarm does not appear on the
touch panel.
2. In the left navigation menu, select Service Setup > Marriage Setup.
3. Select Start and complete the Marriage Setup wizard.
At the Arming stage, enter the Marriage password.
4. Select Finish.
Disposing of the product packaging
Once the product has been installed and set up, Christie recommends reusing or recycling the product
packaging according to your local regulations.
Completing the installation checklist
Complete the provided installation checklist (P/N: 020-103137-XX) and return it to Christie.
Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe
020-103907-01 Rev. 1 (03-2024)
Copyright
©
2024 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing and setting up
27
Advertisement
Table of Contents
