Preferences Window - Christie CP 2210 User Manual

6.15.3 Preferences Window

Use the Preferences window to modify projector system settings. To open the Preferences window you need
Administrator or Service permissions. Tap Menu > Administrator Setup > Preferences.
Table 6.24 Preferences Window
Control
Temperature Units
Image
Orientation
Luminance Units
Language
Beep on Screen Press
Enable Screen Saver / Screen
Saver Delay
Over Temperature, Fan Failure,
Lamp Rotation, Lamp Expiry,
LD Log Warning
Brightness
Calibrate Screen
CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
1
2
4
Figure 6-30 Preferences Window
Description
Determines if temperature information is displayed in Celsius or Fahrenheit.
The direction of the on screen image.
Determines if luminance information is displayed in Foot Lamberts or Candela.
The language for the TPC and online help.
Plays a sound when you touch the TPC screen.
Enables a screen saver and determines the frequency that the screen saver appears.
Opens an alarm window when a pre-defined event occurs.
Adjusts the brightness of the touch screen display.
Opens the Calibrate window.
Section 6: Projector Menus
3
6-37