Removing And Installing Bearing Bracket - Volkswagen Jetta 2005 Workshop Manual

Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
2.11

Removing and installing bearing bracket

2.11.1 Removing
Note
Removal and installation are described only for the right bearing
bracket. The removal and installation of the left bearing bracket
is similar.
– Remove housing ⇒ page 151
– Remove door handle
– Remove door assembly carrier
– Remove bolt -3- from bearing plate -1-.
– Remove bearing plate -1- inwards in -direction of arrow- out of
door cut-out in door -2-.
2.11.2 Installing
– Insert bearing plate -1- into door -2- in -direction of arrow-.
Further installation is performed in reverse order of removal.
– Specified torque for bolt -3-: 4.5 Nm.
154
Rep. Gr.58 - Rear doors, door components
.
⇒ page 152 .
⇒ page 145 .