Volkswagen Jetta 2005 Workshop Manual page 243

2.1.6 Front bumper cover add-on parts
1 - Front bumper cover
❑ Material PUR/MF 17
❑ Removing ⇒ page 231
❑ Installing ⇒ page 232
2 - End plate
❑ Left
❑ Clipped on the inside
with 4 panel clips.
❑ Only remove when
bumper cover -1- is re‐
moved
3 - Air intake grille
❑ Left
❑ Secured with four bolts
from the outside.
❑ Specified torque: 2 Nm
4 - Centre air intake grille
❑ Clipped on the inside
with 19 panel clips.
❑ Only remove when
bumper cover -1- is re‐
moved
5 - Spoiler attachment
❑ Only remove when
bumper cover -1- is re‐
moved
6 - Air intake grille
❑ Right
❑ Secured with four bolts
from the outside.
❑ Specified torque: 2 Nm
7 - Towing eye cap
❑ Engaged in front bumper cover -1-
8 - End plate
❑ Right
❑ Clipped on the inside with 4 panel clips.
❑ Only remove when bumper cover -1- is removed
9 - Adapter
❑ Secured to the middle of the front bumper -1- with four bolts from above and four blind rivets from below.
❑ Specified torque for the 4 bolts (2 Nm).
Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
2. Front bumper, Cup Edition
233