Removing And Installing Release Lever - Volkswagen Jetta 2005 Workshop Manual

– Now loosen bolts -1- to correct or adjust gaps at front of bonnet
⇒ Body Repairs; Rep. Gr. 00 ; Body dimensions .
Specified torque for bolts -1-: 12 Nm.
– Adjust arrester ⇒ Item 1 (page 23)
1.12

Removing and installing release lever

1.12.1 Removing
– Pull operating lever -1- and release bonnet.
– Insert a small screwdriver in gap between release lever -1- and
clip -2-.
– Lever clip -2- out of release lever -1- and pull off release lever.
General body repairs, exterior - Edition 10.2009
.
Golf Variant 2007 ➤ , Jetta 2005 ➤
27
1. Bonnet