Volkswagen Jetta 2005 Workshop Manual page 105

1.22.1 Removing
– Pull door outer seal off door.
1.22.2 Installing
– Remove adhesive residues with erasure disc of adhesive strip
remover -VAS 6349- .
– Immediately before bonding door outer seal, clean bonding
surface thoroughly with adhesive remover -D 002 000 10- .
• Bonding surfaces must be free of dust and grease and there
should be no adhesive residues.
– Align door outer seal with section -arrow b- towards door lock
securing bolts.
– Door outer seal vulcanised point -arrow c- should then be in
middle of sill.
Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
95
1. Front door