Removing And Installing Bellows - Volkswagen Jetta 2005 Workshop Manual

Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
❑ Qty. 3
❑ 3.5 Nm
13 - Crank for emergency operation
❑ Hexagon key is located in vehicle tool kit
14 - Electric drive
❑ Removing and installing
❑ Adjusting drive (0 position)
15 - Spring
❑ Qty. 2
❑ Pushes up wind deflector.
❑ Clipped onto wind deflector and can be renewed individually
❑ Removing ⇒ page 169
16 - Wind deflector
❑ Removing and installing
17 - Wind deflector bearing
❑ Qty. 2
❑ Clipped onto wind deflector and can be renewed individually
❑ Removing ⇒ page 169
18 - Front guide
❑ Can be pushed out of guide rail individually.
❑ Removing ⇒ page 178
19 - Lower rear guide
❑ Is removed together with guide plate
20 - Torx bolt
❑ Qty. 3 on each side
❑ 5 Nm
21 - Guide plate
❑ Removing and installing
22 - Spacer
❑ Removing and installing
1.4

Removing and installing bellows

1.4.1 Removing
– Slide sliding headlining to rear.
– Run sliding/tilting sunroof glass panel to tilted position.
– Carefully unclip bellows -1- from lower part of guide plate -3-
using a removal wedge -3409- .
– Pull bellows -1- off securing pins -4-.
– Detach bellows -1- at top rear -2-.
164
Rep. Gr.60 - Sunroof
⇒ page 171
⇒ page 172 .
⇒ page 169
⇒ page 178
⇒ page 177
⇒ page 177