Establishing Reference Points Of Panorama Sliding Roof - Volkswagen Jetta 2005 Workshop Manual

Hide thumbs Also See for Jetta 2005:
Table of Contents

Advertisement

Opening of front glass panel can be preselected using rotary
switch -1-.
Opening glass panel to the so called comfort position -4-, pre‐
vents to a large extent wind noise while driving, which can occur
when roof is fully open.
Glass panel can be tilted and closed using pull and push function
on rotary switch.
Sun blind opening button -2- and sun blind closing button -3- are
integrated into rotary switch.
The panorama sliding roof is equipped with a roll-back function.
If the glass panel encounters an obstruction while closing from
tilting or sliding position, it will open automatically.
In addition, there is an emergency closure function. If problems
occur during closure, panorama sliding roof can be forced to close
by pulling rear end of rotary switch. Rotary switch must thus be in
"Sliding sunroof closed" position.
The roll-back function is disabled when the emergency closure
function is active.
The sliding sunroof motor is equipped with an overheating pro‐
tection, whose activation depends on various parameters. The
sliding sunroof motor is functional again after a cooling-off phase.
In the event of power failure, front glass panel and sun blind can
be moved manually
⇒ page 217
2.3
Establishing reference points of panor‐
ama sliding roof
Note
After renewal of glass panel, motor, tilting mechanism or sun
blind, establish reference points of panorama sliding roof for
respective drive.
Roll-back function is switched off when establishing reference
points.
Establishing reference points of sliding sunroof motor
Ignition is switched on.
Rotary switch must be in "Sliding sunroof closed" position.
– Pull rotary switch -1- downwards and hold during whole proc‐
ess to establish reference points (approx. 20 s) in this position.
– When establishing reference points, glass panel first closes
and then moves approx. 200 mm towards the rear.
– After glass panel is closed again, establishment of reference
points is finished and rotary switch must be released.
Establishing reference points for sun blind motor
Ignition is switched on.
General body repairs, exterior - Edition 10.2009
.
Golf Variant 2007 ➤ , Jetta 2005 ➤
2. Panorama sliding sunroof (Arvin-Meritor)
183

Advertisement

Table of Contents
loading

This manual is also suitable for:

Golf variant 2007

Table of Contents