Removing And Installing Side Turn Signal Repeaters; Removing And Installing Entry Light - Volkswagen Jetta 2005 Workshop Manual

Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
2.6 Removing and installing side turn signal
repeaters
Note
The removal and installation sequence is only for the left side
♦
mounted turn signal. The removal and installation of the right
side turn signal repeater is similar.
The side turn signal repeaters are fitted with long-life light-
♦
emitting diodes (LEDs) instead of conventional bulbs.
Therefore, changing bulbs is not necessary. In case of dam‐
♦
age, the entire turn signal must be renewed.
2.6.1 Removing
– Remove mirror glass
– Remove mirror housing
– Remove trim ⇒ page 329
– Remove bolts -4- and remove assembly part -1- downwards.
– Detach connector -5- from turn signal -3-.
– Remove bolts -2- and take turn signal -3- off assembly part
-1-.
2.6.2 Installing
Install in reverse order of removal.
Finally carry out a functional check.
2.7

Removing and installing entry light

Note
The removal and installation sequence is only for the left entry
light. The removal and installation of the right entry light is similar.
2.7.1 Removing
– Remove mirror glass
– Remove mirror housing
– Remove trim ⇒ page 329
330
Rep. Gr.66 - Exterior equipment
⇒ page 328 .
⇒ page 328 .
.
⇒ page 328 .
⇒ page 328 .
.