– Loosen bolts -3- (do not remove) from inside by turning to right
and press clamping jaws apart.
– Applying light pressure press door window -1- in clamping
jaws in -direction of arrow- and align door window tension free
at rear window channel.
When doing so, ensure that door window -1- is positioned parallel
to window channel.
– Tighten clamping jaws by turning bolts anti-clockwise from in‐
terior.
Specified torque for bolt: 8 Nm.
Then test for proper function.
Further installation is performed in reverse order of removal.
Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
283
2. Front door windows