Removing And Installing Side Panel Trim Strips On Gli Vehicles - Volkswagen Jetta 2005 Workshop Manual

5.2 Removing and installing side panel trim
strips on GLI vehicles
5.2.1 Removing
– Remove bolts -1- (Torx T25) from body.
– Remove side panel trim strip -2- in direction of -arrow-.
As necessary
– Slide retainer -2- forwards and release it as described
-arrow-.
– Remove damaged bolts -1-.
Note
The part number for bolts -1- deviates from the production num‐
ber. Refer to parts department.
5.2.2 Installing
– Clean side panel and retainer to remove adhesive remains,
we recommend isopropyl alcohol.
As necessary
– Install bolts -1-. Specified torque: 1.2 ±0.1 Nm
– Install retainer -2-, by checking that all bolts fit in their respec‐
tive holes then slide retainer forwards.
Continuation for all cases
Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
345
5. Mouldings and trims