Further installation is performed in reverse order of removal
1.8
Installing new outer panel on door
Caution
Bolts of different types are used to secure outer panel of door.
If these are fitted in the wrong positions, the outer panel for the
door will be damaged.
Note
Observe section preparing door outer panel for bonding
•
The old (damaged) outer panel with retaining rails is removed
⇒ page 112
.
– Install front -2- and rear -6- retaining rails on inner part of door
-1-. Use "bolt with no point but with thicker washer" for this.
Specified torque for bolts -3- and -5-: 14 Nm
Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
⇒ page 121
115
1. Rear door (saloon)