Assembly Overview - Assembly Carrier - Volkswagen Jetta 2005 Workshop Manual

Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
– Loosen striker pin -1- by loosening bolts -2- on side panel.
– Adjust rear door at striker pin -1- so that rear door is flush with
rear side panel when shut (wind noise).
Maximum twist tolerance -A- of striker pin: ± 3°
– Retighten bolts -2-.
Specified torque: 20 Nm
WARNING
Only use this adjustment to adjust door inwards or outwards,
never use for vertical adjustment. Door must not move up‐
wards or downwards when opening and closing. This indicates
that the vertical adjustment is incorrect.
2.6

Assembly overview - assembly carrier

Note
The right side is shown. The left side is similar.
1 - Bolt
❑ Qty. 2
❑ 18 Nm
2 - Door lock
❑ Removing and installing
⇒ page 155
3 - Assembly carrier
❑ Removing and installing
⇒ page 145
4 - Bolt
❑ Qty. 8
❑ 8 Nm
5 - Cover
6 - Window regulator motor
❑ Removing and installing
144
Rep. Gr.58 - Rear doors, door components