Removing And Installing Window Slot Outer Seal - Volkswagen Jetta 2005 Workshop Manual

Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
– Pull door window upwards -arrow- out of window slot.
4.3.2 Installing
Note
When installing door window, always renew spreader plug and
♦
spreader pin.
Before inserting spreader plug and spreader pin check washer
♦
for damage.
– With door window -1- removed insert spreader plug -3- in mid‐
dle - centralised.
– Press spreader pin -2- flush into spreader plug -3-.
– Guide door window -1- into door and insert door window into
mounting of window regulator guide -4-.
– With light pressure from above -arrow-, engage window -1- in
mounting of window regulator guide -4-.
Further installation is performed in reverse order of removal.
Carry out functional test function before installing door trim.
4.4 Removing and installing window slot
outer seal
4.4.1 Removing
– Remove door window
310
Rep. Gr.64 - Glazing
⇒ page 309 .