Assembly Overview - Rear Window (Saloon); Removing And Installing Rear Window (Saloon) - Volkswagen Jetta 2005 Workshop Manual

Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
1.7

Assembly overview - rear window (saloon)

1 - Rear window
❑ Removing and installing
⇒ page 266
2 - Rear lid
3 - PUR adhesive sealant
❑ Cross section of bead:
width = 6.5 mm, height =
10 mm (including resid‐
ual material on window
glass and window
flange).
❑ Minimum curing period
⇒ page 276
4 - Windscreen adjuster
5 - C-pillar trim
❑ Removing ⇒ General
body repairs, interior;
Rep. Gr. 70 ; Pillars and
side panel trim .
1.8 Removing and installing rear window
(saloon)
1.8.1 Removing undamaged rear window
– Remove C-pillar trims ⇒ General body repairs, interior; Rep.
Gr. 70 ; Pillars and side trims .
– Remove roof end strip ⇒ General body repairs, interior; Rep.
Gr. 70 ; Roof trims .
– Remove rear shelf ⇒ General body repairs, interior; Rep. Gr.
70 ; Luggage/load compartment trim .
– Remove high-level brake light ⇒ Electrical system; Rep. Gr.
94 ; Additional brake lights .
– Disconnect connections for heated rear window and window
aerial.
– Insert cutting cord into window flange using tube.
266
Rep. Gr.64 - Glazing