Touching Up Paint Damage; Preparing Body Flange For Glazing - Volkswagen Jetta 2005 Workshop Manual

– Now apply primer -4- evenly in one motion using applicator -
D 009 500 25- -3- to the previously cleaned area -1- of window.
Ensure that glass adhesive is applied to primed area at a distance
of approx. 2 mm from sealing lip -2-.
Drying time approx. 10 minutes
1.17

Touching up paint damage

If paintwork is damaged, paint structure must be restored accord‐
ing to specifications in "Paint" workshop manual.
1.18

Preparing body flange for glazing

– Cut back remaining material on body flange with electric cutter
-V.A.G 1561 A- and scraping blade -V.A.G 1561/8- , but do not
remove completely.
Note
Remaining material serves as adhesion base for newly applied
adhesive sealing compound. Keep bonding surfaces free of dirt
and grease.
Exception: If bonding is not performed immediately after cutting
back, the remaining residual material must be activated with ac‐
tivator -D 181 801 A1- .
Caution
Activator must not have contact with paint or the paintwork will
be damaged.
If the window flange has been repaired or partially renewed, the
area concerned must be cleaned and primed again after painting.
Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
275
1. Flush bonded windows