Removing And Installing Rear Lid - Volkswagen Jetta 2005 Workshop Manual

Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
10 - Registration plate light
❑ Removing and installing
⇒ Electrical system; Rep. Gr. 94 ; Lights, bulbs, switches - exterior
11 - Rear window wiper
❑ Removing and installing ⇒ Electrical system; Rep. Gr. 92 ; Window washer/wiper system
3.3

Removing and installing rear lid

3.3.1 Removing
– Remove rear lid trim ⇒ General body repairs, interior; Rep.
Gr. 70 ; Rear lid trim .
– Remove rear lid window frame trim ⇒ General body repairs,
interior; Rep. Gr. 70 ; Rear lid trim .
– Disconnect all connections in rear lid.
– Release bellows -1- and guide electrical wiring -5- through
opening in rear lid.
– Loosen bolts -3- on hinge -2- (do not remove).
Further dismantling requires the assistance of a second mechan‐
ic.
– Remove gas strut -4-
– Remove bolts -3-.
– Remove rear lid from hinge.
3.3.2 Installing
Further installation is possible only with the help of a second me‐
chanic.
– Position rear lid carefully on hinges.
40
Rep. Gr.55 - Bonnet, rear lid
⇒ page 41 .