Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
1.22.1
Removing
– Pull door outer seal -1- off door -2-.
1.22.2
Installing
– Remove adhesive residues with erasure disc of adhesive strip
remover -VAS 6349- .
– Immediately before bonding outer seal for door, clean bonding
surface thoroughly with adhesive remover -D 002 000 10- .
•
Bonding surfaces must be free of dust and grease and there
should be no adhesive residues.
– The vulcanised point -arrow b- of door outer seal -1- must be
located in centre of sill.
134
Rep. Gr.58 - Rear doors, door components