Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
– Disconnect connector -3- from connection on release button
-1-.
– Unscrew the two nuts -2- from studs for release button and
take cover -4- off upwards.
– Remove release button -1- from rear lid.
In case of electrical malfunction, rear lid can be opened using lock
emergency release
⇒ page 48
sible through an aperture in rear lid trim.
3.8.2
Installing
Install in reverse order of removal.
Specified torque for nuts: 8 Nm.
Before closing rear lid, check function of lid release components.
3.9
Removing and installing lid lock
3.9.1
Removing
– Remove rear lid trim ⇒ General body repairs, interior; Rep.
Gr. 70 ; Trim, insulation .
– Disconnect connector -3- on back of lock.
– Remove bolts -2- and take off lock -1- from rear lid.
48
Rep. Gr.55 - Bonnet, rear lid
. Emergency release is acces‐