Volkswagen Jetta 2005 Workshop Manual page 277

– Pull cutting cord through adhesive sealing material into inside
of vehicle using awl -V.A.G 1474/2- .
– Pull the other end of the cord through into the interior and
counterhold using handle -V.A.G 1351/1- .
– Secure inner end of cord on reel device -V.A.G 1654- .
– Position reel device -V.A.G 1654- .
– Carefully slide cover -V.A.G 1474/8- -1- between rear window
and moulded headliner, remove moulded headliner securing
screws for this.
– Position reel device -V.A.G 1654- in "position I".
– Move reel device according to position required and cut win‐
dow free.
– Press cutting thread against window glass with plastic wedge
during cutting process, in order to have clearance at window
flange.
– Instead of reel device -V.A.G 1654- , reel device -V.A.G 1654
A- can be used.
– One suction cup can be removed from the reel device as
shown in illustration. This ensures that the reel device roller
can be guided closer to the window flange.
1.8.2 Removing broken rear window
– Protect body and interior from glass splinters.
– Remove pieces of glass up to adhesive sealing material.
– Remove C-pillar trims ⇒ General body repairs, interior; Rep.
Gr. 70 ; Pillars and side trims .
Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
267
1. Flush bonded windows