Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
– Remove lock cylinder
– Remove door handle
– Remove bolt -1- from bearing bracket -2- which is located be‐
hind door outer panel.
– Remove all bolts -2-, -3- and -4-.
Note
It is possible to find bolt type -4- instead of bolt type -2- in rear upper location on door of some vehicles. If this
is the case, do not replace bolt type -4- with bolt type -2-.
– Carefully remove door outer panel.
74
Rep. Gr.57 - Front doors, door components, central locking
⇒ page 86
.
⇒ page 86
.