Volkswagen Jetta 2005 Workshop Manual page 328

Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
– Secure door window against sliding down with adhesive tape.
– Pull connector -1- in direction of -arrow- off window regulator
motor with control unit -3-.
– Remove the three bolts -2-.
– Remove window regulator motor with control unit -3- from as‐
sembly carrier.
4.9.2 Installing
– Install window regulator motor with control unit -3-.
– Move door window lightly up and down so that the splines be‐
tween motor and cable drum engage easier.
– Tighten bolts -2- for window regulator motor (3.5 Nm).
– Reconnect connector -1- to window regulator motor with con‐
trol unit -3- (in opposite direction of -arrow-).
– Run window regulator twice in each direction to upper and
lower stops. This initiates and readies the window regulator
motor and activates the roll-back function.
318
Rep. Gr.64 - Glazing