Removing And Installing Sliding Headliner - Volkswagen Jetta 2005 Workshop Manual

Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
– Insert front-end hook -3370- between edge of roof and wind
deflector bearing -arrow-.
– Pull wind deflector bearings out of detents on left and right, in
direction of -arrow-, using front-end hook -3370- .
– Remove wind deflector upwards out of guide rails.
1.9.2 Installing
– Place wind deflector in guide rails and slide wind deflector with
height limit stop under front of roof aperture on both sides.
– Using light pressure press wind deflector bearings into guide
rails.
Note
Wind deflector bearings must audibly engage in the guide rails.
1.10 Removing and installing sliding headlin‐
er
1.10.1 Removing
– Removing glass panel for sunroof
– Move sliding headliner backwards slightly.
– Remove front bolts -arrow- on left and right.
– Push spring slide forwards past the stop -1-.
– Move sliding headliner forwards and lift sliding headliner
slightly above roof aperture.
– Remove rear bolt -arrow- on left and right.
– Push spring slide to rear and remove sliding headliner -1- out
upwards.
170
Rep. Gr.60 - Sunroof
⇒ page 166 .