1.2
Assembly overview - bonnet
1 - Bonnet
❑ Removing and installing
⇒ page 17
❑ Adjusting
⇒ page 25
2 - Adjustment buffer
❑ Qty. 2
❑ Adjusting
⇒ page 25
3 - Stop buffer
❑ Qty. 2
4 - Insulation
❑ Removing and installing
⇒ page 20
5 - Guide
❑ Qty. 2
6 - Lid hinge
❑ Removing and installing
⇒ page 19
❑ Adjust bonnet
⇒ page 25
.
7 - Gas strut
❑ Removing
⇒ page 19
❑ Releasing gas
⇒ page 19
8 - Seal
❑ Secured to inner bonnet
with clips
1.3
Removing and installing bonnet
1.3.1
Removing
– Remove left and right washer jets -6- ⇒ Electrical system;
Rep. Gr. 92 ; Windscreen washer system .
– Unclip line -2- from bonnet hinge -3- and bonnet -5-.
– Pull line -2- out through aperture in bonnet -5-.
– Loosen hexagon nuts -1- on left and right (do not remove).
Further dismantling requires the assistance of a second mechan‐
ic.
– Disconnect gas strut -4- from bonnet -5-
Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
⇒ page 19
.
17
1. Bonnet